Switch/dimming actuator, 8 x AC 230 V, 16 A, 1…10 V, UL standard

• For switching and dimming of eight mutually independent groups (channels) of fluorescent lamps with dimmable electronic control gear (ECG)
• 8 control voltage outputs 1...10 V DC
• Control power min. 60 OSRAM ECG dynamic each
• 8 switching outputs (relay contacts) for 230 V AC‚ 50/60 Hz‚ 16 A at p.f. = 1
• Each of them for connection of min. 30 OSRAM ECG dynamic for 58 W fluorescent lamps
• Slide switch per relay output for manual operation and switch position indication
• Selection between identical or individual configuration of all channels
• Command objects for each actuator channel for switching on/off‚ dimming brighter/darker and set/value
• One 1-bit and one 8-bit-status object (switching state and dimming value) per output
• Per channel configurable time-limited activation of the lighting during night mode (base lighting)
• Warning 30 seconds prior to imminent switch off by dimming to 50 % of the previous dimming value for each channel with time-limited operation
• Switching on or off of a channel by dimming brighter/darker
• Configurable dimming value upon switching on
• Jumping or dimming to a new dimming value
• Configurable dimming time from 0...100%
• Integrated 8 bit scene control and assignment of each output to up to 8 scenes
• Transmission of status objects on request‚ cyclically and/or automatically after changes
• Configurable behaviour on bus voltage failure and recovery
• Bus-powered electronics
• Integrated bus coupling unit‚ bus connection via bus terminal or contact system to data rail
• Modular installation devices for mounting on TH35 EN 60715 mounting rail

     Dimension width (1 MW = 18 mm) 8 MW