The QS18 Series Clear Object Detection Sensor features a polarized coaxial optical design to ensure reliable detection of transparent, translucent, and opaque targets.
Supply Voltage | 10 V to 30 V dc (10% maximum ripple) |
---|---|
Supply Current (Exclusive of Load Current) | < 25 mA at 15 V < 40 mA at 24 V |
Repeatability | 100 μs |
Supply Protection Circuitry | Protected against reverse polarity and transient voltages |
Output Protection Circuitry | Protected against false pulse on power-up and continuous overload or short-circuit of output |
Output Configuration | Current sourcing (PNP) or current sinking (NPN), depending on model; Light- or dark-operate selectable; Selectable 30 ms output OFF-delay Rating: 100 mA max Off-state leakage current:< 50 μA at 30 V ON-state saturation voltage:< 1.5 V at 10 mA; < 3 V 100 mA |
Output Response Time | Note: Momentary delay on power-up; output does not conduct during this time 400 μs ON/OFF |
Emitter LED | Visible red, 625 nm |
Indicators | Two LEDs (1 green, 1 amber) Green solid: Indicates power applied and sensor ready Green flashing: Indicates sensor operating in marginal state, in need of reconfiguration Amber solid: Indicates output conducting |
Mounting Torque | Nose mount: 18 mm mounting nut, 20 lbf·in (2.3 N·m) Side mount: Two M3 screws, 5 lbf·in (0.6 N·m) |
Construction | ABS housing, PMMA window |
Connections | PVC-jacketed 4-conductor 2 m (6.5 ft) or 9 m (30 ft) unterminated cable, or 4-pin Euro-style or 4-pin Pico-style quick-disconnect (QD), either integral or 150 mm (6 in) pigtail, are available. QD cordsets are ordered separately. |
Operating Conditions | Temperature: –40 °C to +70 °C (–40 °F to +158 °F) Relative Humidity: 90% at +50 ºC (non-condensing) |
Environmental | IEC IP67 |
Application Notes | If the push button does not appear to be responsive, perform the push button enable procedure |