Scroll Up


Products


> > Gigabit Ethernet Switch-MAR1030-24 port; 14xTX, 10xMM SC


Description

Industrial managed Fast/Gigabit Ethernet Switch, 19" rack mount, fanless Design, according to IEEE 802.3, store-and-forward-switching

Port type and quantity

Gigabit-Ethernet ports in total: 2; 2 x Combo ports (10/100/1000BASE-TX RJ 45 plus FE/GE-SFP-slot; Fast-Ethernet ports in total: 24 x ports in total; 14 x Twisted Pair, 10 x Multimode SC,

Type

MAR1030-CCMMMMMMMMMMTTTTTTTTTTTTTTUGGHPHH08.0.

Order No.

MAR1030-CCMMMMMMMMMMTTTTTTTTTTTTTTUGGHPHH08.0.

More Interfaces

Power supply/signaling contact

Power supply 1: power supply 3-pin spring clip, signal contact 2-pin spring clip; Power supply 2: power supply 3-pin spring clip, signal contact 2-pin spring clip

V.24 interface

1 x RJ11 socket

USB interface

1 x to connect auto-configuration adapter ACA21-USB

Network size - length of cable

Twisted pair (TP)

0 m ... 100 m

Multimode fiber (MM) 50/125 µm

0 - 5000 m, 8 dB Link Budget at 1300 nm, A = 1 dB/km, 3 dB reserve, B = 800 MHz x km and cf. SFP modules M-SFPxx

Multimode fiber (MM) 62.5/125 µm

0 - 4000 m, 11 dB Link Budget at 1300 nm, A = 1 dB/km, 3 dB reserve, B = 500 MHz x km and cf. SFP modules M-SFPxx

Single mode fiber (SM) 9/125 µm

cf. SFP modules M-SFPxx

Single mode fiber (LH) 9/125 µm (long haul transceiver)

cf. SFP modules M-SFPxx

Network size - cascadibility

Line - / star topology

Any

Ring structure (HIPER-Ring) quantity switches

100 switches

Power requirements

Operating voltage

Power supply 1: 120/250 VDC, 110/230 VAC; Power supply 2: 120/250 VDC, 110/230 VAC

Current consumption at 230 V AC

Power supply 1 and 2: 150 mA (35W) max, if all ports are equipped with fiber

Software

Management

Serial interface, web-interface, SNMP V1/V2, HiVision file transfer SW HTTP/TFTP, LLDP-MED, Voice VLAN

Diagnostics

LEDs, log-file, syslog, relay contact, RMON, port mirroring 1:1 and n:1, egress/ingress traffic configurable, topology discovery 802.1AB, cable tester (TX), address conflict detection, network error detection, SFP diagnostic [temperature, optical input and output power (µW and dBm)], Trap for configuration saving and changing, duplex mismatch detection, disable learning, Port Monitor

Configuration

Comand line interface (CLI), TELNET, BootP, DHCP, DHCP option 82, HIDiscovery, easy device exchange with auto-configuration adapter ACA21-USB (automatic software and/or configuration upload), automatic script load from ACA21, integrated DHCP server per port, DHCP relay, automatic invalid configuration undo, Offline Configuration, SFP Whitelist, ARC automatic ring configuration (MRP), automatic port shutdown (link flapping), configuration signature (water marking), overload detection

Security

Port Security (IP und MAC) with multiple addresses (MAC 50 per port), SNMP V3, SSHv2, Authentication (IEEE802.1x), 802.1x Multi Client Authentication, Guest VLAN and Unauthenticated VLAN, Port based Radius VLAN assignment

Redundancy functions

HIPER-Ring, Fast HIPER-Ring, MRP, MSTP, RSTP - IEEE802.1D-2004, MRP and RSTP in parallel, link aggregation, multiple rings

Filter

QoS 4 classes, priorisation (IEEE 802.1D/p), VLAN (IEEE 802.1Q), Voice VLAN, shared VLAN learning, Q-in-Q double VLAN tagging, multicast IGMP v1/v2/v3 (snooping/querier), multicast detection unknown multicast, broadcast-, unicast-, multicast limiter, fast aging, GMRP IEEE 802.1D, Jumbo Frame Support

Industrial Profiles

EtherNet/IP and PROFINET (2.2 PDEV, GSDML Stand-alone generator, automatic device exchange) profiles included, configuration and diagnostic via automation software tools like e.g. STEP7, or Control Logix IEC61850 protocol (MMS Server, Switch Model)

Time synchronisation

SNTP Server, PTP / IEEE 1588, realtime clock with energy buffer

Flow control

Flow Control 802.3x, Port Priority 802.1D/p, Priority (TOS/DIFFSERV), Prio (MAC/IP), Prio Mapping (TOS Layer2), Traffic Shaping (Unicast, Multicast, Broadcast) Ingress / Egress

Ambient conditions

Operating temperature

-40 C ...+85 C

Storage/transport temperature

-40 C ...+85 C

Relative humidity (non-condensing)

10 % ... 95 %

Protective paint on PCB

No

Mechanical construction

Dimensions (W x H x D)

445 mm x 44 mm x 308 mm

Mounting

19" control cabinet

Weight

appr. 5 kg

Protection class

IP30

Mechanical stability

IEC 60068-2-27 shock

15 g, 11 ms duration, 18 schocks

IEC 60068-2-6 vibration

1 mm, 2 Hz - 13.2 Hz, 90 min.; 0.7g, 13,2 Hz - 100 Hz, 90 min.; 3.5 mm, 3 Hz - 9 Hz, 10 cycles, 1 octave/min.; 1g, 9 Hz - 150 Hz, 10 cycles, 1 octave/min.

EMC interference immunity

EN 61000-4-2 electrostatic discharge (ESD)

8 kV contact discharge, 15 kV air discharge

EN 61000-4-3 electromagnetic field

35 V/m (80 - 2700 MHz); 1kHz, 80% AM

EN 61000-4-4 fast transients (burst)

4 kV power line, 4 kV data line

EN 61000-4-5 surge voltage

Power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line IEEE1613: power line 5kV (line/earth)

EN 61000-4-6 conducted immunity

2,5 kV (line/earth), 1 kV (line/line) (1MHz)

EN 61000-4-16 mains frequency voltage

30V, 50Hz continous; 300V, 50Hz 1s

EMC emitted immunity

FCC CFR47 Part 15

FCC CFR47 Part 15 Class A

EN 55022

EN 55022 Class A

Approvals

Safety of industrial control equipment

cUL 508 (pending)

Hazardous locations

cUL 1604 Class1 Div 2 (pending)

Germanischer Lloyd

Germanischer Lloyd (in preparation)

Substation

IEC 61850-3; IEEE 1613

Transportation

EN 50121-4, NEMA TS

Scope of delivery and accessories

Scope of delivery

Device, operating manual