Scroll Up


Detection (Sensors) > Photoelectric Sensors Q26 Series Clear Object Sensor
Q26 Series Clear Object Sensor

Brand: Banner Engineering

Product Tags : Q26 Series Clear Object Sensor, clear object detection, transparent object sensor

Q26 Series Clear Object Sensor

Product Specifications

Overview

Sensor solution for clear object detection applications. The Q26 cannot be tricked by mirror-like surfaces and has precise leading edge detection.

  • Clear, transparent objects reliably detected
  • Polarized retro coaxial optical design enables detection of mirror-like surfaces; allows sensor and reflector to operate at very short distances; enables very precise leading edge detection
  • LO/DO switch, single turn sensitivity potentiometer, compact housing
  • Quick and easy adjustment of sensitivity with single-turn potentiometer
  • Compact housing fits in tight locations and 20mm mounting hole spacing enables quick mechanical installation

 

Product Specifications

Supply Voltage and Current 12 to 30V dc (10% maximum ripple within specified limits); supply current (exclusive of load current): 15mA
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration Primary output (pin 2) NPN or PNP (current sinking or sourcing), depending on model; second output (pin 4) is a Health mode output.
Output Rating 100 mA max

OFF-state leakage current: less than 1 microamp @

30V dc

ON-state saturation voltage: less than 1V @ 10 mA

dc; less than 1.5V @ 150 mA dc
Output Protection Circuitry Protected against false power-up and continuous overload or short circuit of outputs
Emitter LED Wavelength 660 nm
Emitter Beam Diameter see Figure 6. Spot Diameter Diagram on page 4 of data sheet.
Output Response Time 250 μS ON and OFF
Repeatability 50 microseconds
Construction ABS plastic housing; glass window
Indicators Green steady: Power ON

Yellow steady: Output conducting
Environmental Rating Leakproof design rated IP67
Operating Conditions Temperature: -10º to +55º C (+14º to 131º F)

Relative Humidity: 90% at 50º; non-condensing
Connection 4-pin Threaded/Snap M8/Pico-Style QD connector or 4-pin 150 mm (6 in.) Euro-style pigtail QD with PVC cable jacket
Vibration and Shock EN60068-2-6

EN60068-2-27
Certifications CE, C UL US listed
Similar Products