85 ... 264 VAC supply voltage
16k program memory
All PLCs can be fitted with 1 or 2 top mounted BD Board additional modules, depending on the number of inputs / outputs.
Input / output numbers of PLCs with 12 inputs / 12 outputs and above can be increased with expansion modules or other modules such as analogue, heat and weight can be added.
3-layer coating provides durability against harsh conditions.
Flash Memory storage allows data to be stored for at least 100 years, even in the event of battery failure.
200 KHz optical isolating inputs / outputs
COM port-600 TVS, static impact protection
Project installation / monitoring via USB port
High-speed inputs support input of the AB phase encoder and pulse + direction mode input. The AB phase signal supports configuration of frequency settings (such as x1, x2, or x4).
Supports high-speed outputs with acceleration and deceleration. Acceleration and deceleration times can be configured. PWM output.
The whole project can be encrypted or partially encrypted (any part or subprogram).
For further protection, by assigning the PLC identification code and project identification code and assigning these two codes to each other, the use of the project in another PLC can be prevented.
Up to 16 analog modules can be added. (Additional power supply may be required)
Up to 8 digital input / output modules can be added. (Additional power supply may be required)