Scroll Up


Detection (Sensors) > Fiber Optic Sensors R55F Fiber Optic Series
R55F Fiber Optic Series

Brand: Banner Engineering

Product Tags : R55F Fiber Optic Series

R55F Fiber Optic Series

  • Product Specifications
  • Similar products
Product Specifications

Overview

 

  • Delivers outstanding color contrast sensitivity
  • Reliably detects 16 levels of grayscale at up to 10,000 actuations per second
  • Available in two fiber types: economical plastic for repeated flexing and glass for harsh conditions
  • Offers choice of models with an infrared (glass only) or visible green, blue, red or white LED
  • Provides 10 to 30V dc supply voltage with bipolar NPN or PNP outputs
  • Features push-button programming for easy-to-set static, dynamic and remote TEACH
  • Uses push-button for manual sensitivity adjustment
  • Easily mounts in confined areas, either flat or to 35 mm DIN rail

 

Product Specifications

Supply Voltage and Current 10 to 30V dc (10% max. ripple) @ less than 70 mA (exclusive of load)
Range Varies by sensing mode and fiber optics used
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration Bipolar:One NPN (current sinking) and one PNP (current sourcing)
Output Rating 150 mA max. each output @ 25° C (derate approximately 1 mA per ° C increase)OFF-state leakage current:less than 5 µA @ 30V dc
ON-state saturation voltage:

PNP:less than 1V @ 10 mA; 1.5V @ 150 mA

NPN:less than 200 mV @ 10 mA; 1V @ 150 mA
Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs
Output Response Time Less than 50 microseconds
Delay at Power-up 100 seconds; outputs do not conduct during this time.
Adjustments Using push buttons—Dynamic (+) and Static (-):

Manually adjust switchpoint using + or - buttons

Dynamic TEACH (TEACH on-the-fly) sensitivity adjustment

Static TEACH sensitivity adjustment

Static Single-Point TEACH

Light operate/dark operate

OFF Delay select: 0, 20 or 40 milliseconds



Using Remote TEACH input (gray wire):

Dynamic TEACH (TEACH on-the-fly) sensitivity adjustment

Static TEACH sensitivity adjustment

Static Single-Point TEACH

Light operate/dark operate

OFF Delay select: 0, 20 or 40 milliseconds

Lockout of push buttons for security
Indicators 10-element Green moving LED light bar:displays signal strength
LO Green ON steady:light operate
DO Green ON steady:dark operate
Output Yellow ON steady:output conducting
OFF-Delay LED indicator:

SETUP Mode:

Green ON steady:40 millisecond delay

Green flashing:20 millisecond delay

Green OFF:no delay

RUN Mode:

Green ON steady:20 or 40 millisecond delay

Green OFF:no delay
Environmental Rating IP67; NEMA 6
Construction Black ABS/polycarbonate blend; nylon fiber clip mounts to standard 35 mm DIN rail

One stainless-steel right-angle bracket and one PBT polyester bracket for mounting to flat surfaces also included with sensor
Connections 2 m or 9 m 5-wire attached PVC cable, or 5-pin Euro-style quick-disconnect fitting. QD cable are ordered separately. Fibers:Fiber clip (no tools required)
Operating Conditions Temperature:-10 to +55° C
Relative humidity:90% @ 50° C (non-condensing)
Application Notes • Do not mount the fiber tip directly perpendicular to shiny surfaces; position it at approximately a 15° angle in relation to the sensing target.

• Minimize web or product flutter whenever possible to maximize sensing reliability.
Similar Products