Scroll Up


> WORLD-BEAM QS18 Expert Series
WORLD-BEAM QS18 Expert Series

Brand: Banner Engineering

Product Tags : Banner engineering, World Beam QS18 Expert Series
WORLD-BEAM QS18 Expert Series

  • Product Specifications
  • Product Documents
  • Similar products
Product Specifications

Overview

  • Single push-button programming of advanced sensing options
  • Five sensor configuration options:
    • Static Teach
    • Dynamic Teach
    • Light Set
    • Dark Set
    • Window Set
  • Five standard sensing modes:
    • Visible diffuse
    • Infrared diffuse
    • Convergent
    • Polarized retroreflective
    • Plastic fiber optic
  • Configurable output options: Light Operate or Dark Operate and a 30 ms off delay
  • 10 to 30 VDC operation with 100 mA NPN or PNP output, depending on model
  • Teach wire input for remote configuration of the sensor
  • Push-button lock-out to prevent accidental configuration changes
  • Bright LED status indicators visible from 360°

Product Specifications

Supply Voltage and Current 10 to 30V dc (10% max. ripple) @ less than 30 mA (exclusive of load); 10 to 24V dc @ greater than 55° C
Range Polarized Retroreflective:3.5 m, range is specified using one model BRT-84 retroreflector
Convergent:16 or 43 mm, depending on model
Diffuse (long range):800 mm
Diffuse (short range):500 mm
Divergent Diffuse:300 mm
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration SPST solid-state:NPN (current sinking) or PNP (current sourcing), depending on model. Configuration in TEACH sequence for light operate (LO) or dark operate (DO). 
Output Rating 100 mA max. OFF-state leakage current:less than 50 µA @ 30V dc
ON-state saturation voltage:less than 1.5V (2 m cable); 1.7V (9 m cable)
Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of output
Output Response Time 600 microseconds ON/OFF
Delay at Power-up Less than 1 second; outputs do not conduct during this time.
Repeatability 75 microseconds
Adjustments Push button or remote wire Thresholds:Push-button/remote-wire teachable
Light/dark operate:Selectable by programming order (load output follows the first taught target condition)
Push-button lockout:(remote wire only)
Indicators 2 LED Indicators:

Green:RUN mode, output short-circuit

Red:Output ON/marginal,TEACH mode
Construction Polycarbonate/ABS housing and TPE push button. 3 mm mounting hardware is included with each sensor.
Environmental Rating IEC IP67; NEMA 6
Connections 2 m or 9 m 4-wire attached PVC cable, or 150 mm pigtail with 4-pin Pico-style QD (Q), or 150 mm pigtail with 4-pin Euro-style QD (Q5), or 4-pin integral Pico-style QD (Q7), or 4-pin integral Euro-style QD (Q8), depending on model. QD cable are ordered separately.
Operating Conditions Temperature:-20° to +70° C
Relative humidity:90% @ 50° C (non-condensing)
Application Note The first condition presented during TEACH mode becomes the OUTPUT ON condition.
Product Documents
WORLD-BEAM QS18 Expert Series22.12.2014 - 4 MbİngilizceCheck Out
Similar Products

WORLD-BEAM QS30 Series

WORLD-BEAM QS30 Standard

D10 Discrete Output

D10 Expert - Small Object Counter

Laser Measurement Sensors

L-GAGE LT7 Series 250 m Range Time-of-Flight Sensor

L-GAGE LT3 Series 50 m Range Time-of-Flight Laser Sensor

U-GAGE S18U Ultrasonic Sensors