Scroll Up


Detection (Sensors) > Photoelectric Sensors >TM18 Series TM18 Expert Series
TM18 Expert Series

Marka: Banner Engineering

Product Labels: TM18 Expert, metal housing photoelectric sensor, Banner Engineering TM18

TM18 Expert Series

  • Product Specifications
  • Similar Products
Product Specifications

Overview

 

  • Features robust nickel-plated housing with sealed membrane switch
  • Offers 10 to 30V dc supply voltage with NPN, PNP or selectable NPN/PNP output
  • Features T-style housing with 18 mm threaded lens
  • Available in diffuse or polarized retroreflective sensing modes
  • Provides single-button setup procedure
  • Offers selectable light-operate or dark-operate operation using push button
  • Provides excellent immunity to noise, including high-speed-switching fluorescent lamps
  • Offers enhanced optical crosstalk avoidance
  • Rated IP67; NEMA 6

 

Product Specifications

Supply Voltage and Current 10 to 30V dc (10% max. ripple) @ less than 40 mA (exclusive of load)
Range Diffuse:500 mm
Polarized Retroreflective:3 m, range is specified using one model BRT-84 retroreflector
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration Solid-state selectable models:NPN (current sinking) or PNP (current sourcing), depending on hookup
Single-output models:NPN (current sinking) or PNP (current sourcing), depending on model
Output Rating 300 mA max. output @ 25° C OFF-state leakage current:

NPN:less than 100 µA @ 30V dc

PNP:less than 300 µA @ 30V dc

ON-state saturation voltage:less than 1 V @ 10 mA; less than 1.5 V @ 300 mA
Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs
Output Response Time 3 milliseconds ON/OFF
Delay at Power-up 300 milliseconds; outputs do not conduct during this time.
Repeatability 30 microseconds max.
Adjustments Push-button dark SET with light/dark operate toggle Solid-state selectable models:NPN/PNP selected by hookup
Indicators Two LED Indicators:Green and Green/Yellow
Power LED:

Green ON steady:power ON

Signal LED:

OFF in RUN Mode:signal absent

Yellow ON steady in RUN Mode:signal present

Yellow/Green flashing in SET Mode:sensor being configured

Final five flashes Green in SET Mode:toggled to light operate

Final five flashes Yellow in SET Mode:toggled to dark operate
Construction Copper/nickel-plated zinc alloy housing
Environmental Rating IEC IP67; NEMA 6
Connections 2 m or 9 m attached PVC cable, 4-pin integral Euro-style quick-disconnect or 150 mm polyurethane pigtail with 4-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.
Operating Conditions Temperature:-20° to +55° C
Relative humidity:90% @ 50° C
Similar Products

TM18 EZ-BEAM DC Series