Scroll Up


Detection (Sensors) > Fiber Optic Sensors >D10 Series D10 Expert with Numeric Display - Analog & Discrete
D10 Expert with Numeric Display - Analog & Discrete

Marka: Banner Engineering

Product Labels: D10 Expert with Numeric Display - Analog & Discrete, analog output, fiber optic, D10UPFP

D10 Expert with Numeric Display - Analog & Discrete

  • Product Specifications
  • Similar Products
Product Specifications

Overview

High-performance, low-contrast plastic fiber optic sensor with numeric display

  • 12 to 24V dc or 15 to 24V dc supply voltage with either an NPN or PNP discrete output, and a 4-20 mA current analog output or 0-10V dc voltage analog output, depending on model
  • Digital display of signal strength and operating status
  • Push-button for easy-to-set static, dynamic or single-point programming
  • Manual adjustment for fine tuning
  • Light- or dark-operate selectable
  • Four-mode power and speed selection with automatic crosstalk avoidance circuitry
  • Response time as fast as 50 microseconds
  • Visible red or green sensing beam

 

Product Specifications

Supply Voltage and Current 4-20 mA analog models:12 to 24V dc (10% max. ripple) @ less than 65 mA (exclusive of load)
0-10V dc analog models:15 to 24V dc (10% max. ripple) @ less than 70 mA (exclusive of load)
Range Varies by sensing mode and fiber optics used
Supply Protection Circuitry Protected against reverse polarity and transient voltage
Output Configuration Two independently configurable outputs, depending on model: NPN (current sinking) with analog output (4-20 mA or 0-10V) or PNP (current sourcing) with analog output (4-20 mA or 0-10V)
Output Rating Discrete output:150 mA max. load

OFF-state leakage current:less than 10 µA @ 24V dc

ON-state saturation leakage (NPN):less than 1.5V @ 150 mA load

ON-state saturation leakage (PNP):less than 2.5V @ 150 mA load

Analog output:4-20 mA or 0-10V dc

Load (4-20 mA models):100 ohms max. impedance

Load (10-30V dc models):1 M ohms min. impedance
Output Protection Circuitry Protected against false pulse on power-up and continuous short-circuit
Output Response Time Discrete output:Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds
Analog output:1 millisecond
Delay at Power-up 1 second; outputs do not conduct during this time.
Adjustments Two push buttons or remote programming of (TEACH) switching threshold response time, OFF-delay, light operate (LO)/dark operate (DO) and display
Indicators Four-digit digital display plus LED indicators for active channel, push-button lockout, OFF-delay and light operate (LO)/dark operate (DO) selection; two yellow LEDs serve as output indicators and active channel indicator.
Construction Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover.
Environmental Rating NEMA 1; IEC IP50
Connections PVC-jacketed 2 m or 9 m 6-wire attached cable or integral 6-pin Pico-style QD. QD cables are ordered separately.
Operating Conditions Temperature:-20° to +55° C
Storage Temperature:-20° to +80° C
Relative humidity:90% @ 50° C
Ambient Temperature Rating:

3 stacked devices:55° C @ 150 mA load

7 stacked devices:50° C @ 50 mA load

10 stacked devices:45° C @ 50 mA load
Installation 35 mm DIN rail or included mounting bracket
Similar Products