Scroll Up



  • Product Specifications
  • Similar Products
Product Specifications

Overview

 

  • Specially designed EZ-BEAM style optics and electronics for reliable sensing without adjustments
  • 20-250V ac with SPST solid-state output
  • T-style plastic housing with 30 mm threaded lens
  • Available in opposed, polarized retroreflective and fixed-field sensing modes
  • Dual-LED multi-function indicators for monitoring sensor performance

 

Product Specifications

Supply Voltage and Current 20 to 250V ac (50/60 Hz) Average current:20 mA
Peak current:200 mA @ 20V ac, 500 mA @ 120V ac, 750 mA @ 250V ac
Range Opposed:60 m
Polarized Retroreflective:6 m, range is specified using one model BRT-3 retroreflector
Fixed-field:0-200, 0-400 or 0-600 cutoff, depending on model
Supply Protection Circuitry Protected against transient voltages
Output Configuration SPST solid-state ac switch; three-wire hookup: Light operate (LO) or dark operate (DO), depending on model Light operate:Output conducts when the sensor sees its own (or the emitter’s) modulated light
Dark operate:Output conducts when sensor sees dark
Output Rating 300 mA max. (continious); Fixed-field derate 5 mA/° C above +50° C Inrush capability:1 A for 20 milliseconds, non-repetitive
OFF-state leakage current:less than 100 µA
ON-state voltage drop:3V @ 300 mA ac; 2V @ 15 mA ac
Output Protection Circuitry Protected against false pulse on power-up
Output Response Time Response time is independent of signal strength Opposed:16 milliseconds ON; 8 milliseconds OFF
Polarized retroreflective and Fixed-field:16 milliseconds ON/OFF
Delay at Power-up 100 milliseconds
Repeatability Repeatability is independent of signal strength. Opposed:2 milliseconds
Polarized Retroreflective and Fixed-field:4 milliseconds
Indicators 2 LED Indicators:Green and Yellow

Green ON steady:power to sensor is ON

Yellow ON steady:sensor sees light

Yellow flashing:marginal excess gain (1-1.5x) in light condition
Construction Thermoplastic polyester housing with polycarbonate or acrylic lenses. One jam nut is included with each sensor.
Environmental Rating Leakproof design rated NEMA 6P; DIN 40050 (IP69K)
Connections 2 m or 9 m attached cable, or 4 pin Micro-style quick-disconnect fitting. QD cables are ordered separately.
Operating Conditions Temperature:-40° to +70° C
Relative humidity:90% @ 50° C (non-condensing)
Vibration and Mechanical Shock All models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz, max, double amplitude 0.06-inch acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation)
Similar Products