Scroll Up


Detection (Sensors) > Laser Sensor >L-GAGE Q50 Series LED Measurement Sensor L-GAGE Q50 Series - Analog Output
L-GAGE Q50 Series - Analog Output

Marka: Banner Engineering

Product Labels: L-GAGE Q50 Series - Analog Output, analog output photoelectric sensor

L-GAGE Q50 Series - Analog Output

  • Product Specifications
  • Similar Products
Product Specifications

Overview

Compact linear displacement sensor with scalable analog output

  • 15 to 30V dc supply voltage with 4-20 mA or 0-10V dc analog output, depending on model
  • Automatic scaling of the analog output over the width of the programmed sensing window
  • Visible red models with 50 to 150 mm or 100 to 300 mm sensing range
  • Infrared models with 50 to 200 mm or 100 to 400 mm sensing range
  • Push-button TEACH-mode programming for custom sensing windows
  • Remote programming for added security and convenience
  • Selectable output response speed of 4 to 64 milliseconds
  • Sensor linearity less than 1 percent of full scale

 

Product Specifications

Supply Voltage and Current 15 to 30V dc (10% max. ripple) @ 70 mA max. (exclusive of load)
Sensing Range Q50AVI and Q50AVU models:50 to 150 mm
Q50AI and Q50AU models:50 to 200 mm
Q50BVI and Q50BVU models:100 to 300 mm
Q50BI, and Q50BU models:100 to 400 mm
Sensing Beam Wavelength:

Q50AVI, Q50AVU, Q50BVI and Q50BVU models:685 nm typical

Q50AI, Q50AU, Q50BI and Q50BU models:880 nm typical

Beam Size:20 mm dia. max.
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration 4-20 mA current sourcing models:1 k ohm max. load @ 24V dc; max. load = [(Vcc-4.5)/0.02] ohms
0-10V voltage sourcing models:15 mA max.
Output Protection Circuitry Protected against short circuit conditions
Output Response Time Fast:

Average interval:4 milliseconds

Update rate:1 millisecond

-3 dB frequency response:112 Hz

Slow:

Average interval:64 milliseconds

Update rate:4 milliseconds

-3 dB frequency response:7 Hz
Delay at Power-up 2 seconds
Resolution Q50B models:

Target distance:200 mm

Slow response:1 mm max.

Fast response:4 mm max.

Q50A models:

Target distance:100 mm

Slow response:0.5 mm max.

Fast response:2 mm max.
Linearity Q50B models:±3 mm
Q50A models:±1.5 mm
Temperature Drift Q50B models:

From 0° to 50° C :-0.25 mm/° C

From -10° to 55° C:-0.35 mm/° C

Q50A models:

From 0° to 50° C:0.08 mm/° C

From -10° to 55° C:0.11 mm/° C
Remote TEACH and Speed Input Impedance 15 k ohms
Remote TEACH Input To TEACH:connect gray wire to +5 to 30V dc
To disable:connect gray wire to 0 to +2V dc (or open connection)
Adjustments Fast speed:connect black wire to +5 to 30V dc
Slow speed:connect black wire to 0 to +2V dc (or open connection)
Indicators Range LED indicator:Green/Red

Green ON steady:target is within sensing range

Red ON steady:target is outside sensing range

Green flashing:outputs are overloaded

OFF:sensor power OFF

TEACH/Output LED indicator:Yellow/Red

Yellow (window limits):target is within taught window limits

Yellow (fixed field):target is closer than cutoff limit

Red:sensor is in TEACH mode

OFF:target is outside taught window limits
Minimum Taught Window Q50B models:

Target distance @ 300 mm:50 mm window

Target distance @ 125 mm:10 mm window

Q50AVI and Q50AVU models:

Target distance @ 50 mm:5 mm window

Target distance @ 75 mm:10 mm window

Target distance @ 100 mm:15 mm window

Target distance @ 125 mm:20 mm window

Q50AI and Q50AU models:

Target distance @ 50 mm:5 mm window

Target distance @ 75 mm:10 mm window

Target distance @ 100 mm:15 mm window

Target distance @ 125 mm:20 mm window

Target distance @ 150 mm:25 mm window

Target distance @ 175 mm:35 mm window

Target distance @ 200 mm:50 mm window
Ambient Light Immunity less than 10,000 lux.
Construction Housing:molded ABS/Polycarbonate
Window lens:acrylic
Environmental Rating IEC IP67; NEMA 6P
Connections 5-conductor 2 m or 9 m shielded PVC-jacketed attached cable, or 5-pin Euro-style quick-disconnect fitting. QD cables are ordered separately.
Operating Conditions Temperature:-10° to +55° C
Relative humidity:90% @ 50° C (non-condensing)
Vibration and Mechanical Shock All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60 Hz max. double amplitude 0.06”, maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave.
Application Note All 15-minute warm-up for maximum performance
Similar Products

L-GAGE Q50 Series LED Measurement Sensor