Scroll Up


> > DF-G1 Fiber Optic Light Receiver
DF-G1 Fiber Optic Light Receiver

Marka: Banner Engineering

Product Labels: DF-G1 Fiber Optic Light Receiver, DF-G1-PR-2M

DF-G1 Fiber Optic Light Receiver

  • Product Specifications
  • Similar Products
Product Specifications

Overview

Advanced amplifier for detection of extraneous light sources

  • Designed to detect light emissions from a wide variety of sources
  • Easy to read dual digital displays simultaneously show signal level and threshold
  • Simple user interface ensures easy sensor set-up and programming
  • Expert TEACH and SET methods ensure optimal gain and threshold for all applications, especially low contrast applications
  • ECO (economy) display mode reduces amplifier power consumption by 25%
  • Cross talk avoidance algorithm allows two fiber assemblies to operate in close proximity for many applications
  • Response speeds as fast as 200 µs

 

Product Specifications

Sensing Beam 660 nm visible red
Supply Voltage 10 to 30V dc (10% max ripple)
Power and Current Consumption (exclusive of load) Standard display mode: 960 mW, Current consumption < 40 mA @ 24V dc

ECO display mode: 720 mW, Current consumption < 30 mA @ 24V dc
Supply Protection Circuitry Protected against reverse polarity, over voltage, and transient voltages
Delay at Power Up 500 milliseconds max.; outputs do not conduct during this time
Output Configuration 1 current sourcing (PNP) or 1 current sinking (NPN) output, depending on model
Output Rating 100 mA max. load (derate 1 mA per °C above 30° C)

OFF-state leakage current: < 5 μA at 30V dc

ON-state saturation voltage: NPN: < 1.5V; PNP: < 2V
Output Protection Protected against output short-circuit, continuous overload,

transient over-voltages, and false pulse on power up
Output Response Time High Speed - 200 us

Standard - 500 us

Long Range - 2 ms

Extra Long Range - 5 ms
Repeatability High Speed - 66 us, Standard/Long Range/Extra Long

Range - 100 us
Connections PVC-jacketed 2 m or 9 m (6.5 ft or 30 ft) 4-wire integral cable or integral 4-pin Pico-style QD or Pico-style 150 mm (6 in) pigtail QD or Euro-style 150 mm (6 in) pigtail QD
Indicators Red 4-digit Display: Signal Level

Green 4-digit Display: Threshold

(In Program Mode, Red and Green displays are used

for programming menus)

Yellow LED: Output conducting
Construction Black ABS/polycarbonate alloy (UL94 V-0 rated) housing,

clear polycarbonate cover
Adjustments 3-way RUN/PRG/ADJ Mode Switch

2-way LO/DO Switch

3-way +/SET/- Rocker Button

• Expert-style teaching (Two-Point and Dynamic

TEACH, Light/Dark/Window/Calibration SET)

• Manually adjust sensitivity (from + and - rocker

button only)

• Response Speed, TEACH Selection, Offset Percent,

Auto Thresholds, Delays/Timers, Display

Readout, Gain Selection, Factory Defaults (from

top panel or remote input)

• Top panel interface lockout (from remote input only)
Factory Default Settings See table on pg. 20 of manual.
Environmental Rating IEC IP50, NEMA 1
Operating Conditions Temperature: -10° to +55° C (+14° to 131° F)

Storage: -20° to +85° C (-4° to +185° F)

Relative Humidity: 90% @ 60° C (non-condensing)
Certifications CE
Similar Products