Scroll Up


Detection (Sensors) > Fiber Optic Sensors >D10 Series D10 Expert with Bargraph Display - Discrete
D10 Expert with Bargraph Display - Discrete

Marka: Banner Engineering

Product Labels: D10 Expert with Bargraph Display Discrete, D10BFP

D10 Expert with Bargraph Display - Discrete

  • Product Specifications
  • Similar Products
Product Specifications

Overview

High-performance, low-contrast plastic fiber optic sensor with bargraph display

  • 10 to 30V dc supply voltage with bipolar NPN or PNP outputs
  • Bargraph display of TEACH and signal strength
  • Push button for easy-to-set static, dynamic or single-point programming
  • Manual adjustment for fine tuning
  • Light- or dark-operate selectable
  • 500 microsecond response with crosstalk avoidance or high-speed mode of 200 microsecond response with crosstalk avoidance disabled
  • Visible red or green sensing beam

 

Product Specifications

Supply Voltage and Current 10 to 30V dc (10% max. ripple) @ less than 45 mA (exclusive of load)
Range Varies by sensing mode and fiber optics used
Supply Protection Circuitry Protected against reverse polarity and transient voltage
Output Configuration Bipolar:One NPN (current sinking) and one PNP (current sourcing)
Output Rating 150 mA max. load OFF-state leakage current:less than 5 µA @ 30V dc
ON-state saturation voltage:

NPN:less than 200 mV @ 10 mA; 1V @ 150 mA load

PNP:less than 1V @ 10 mA; 1.5V @ 150 mA load
Output Protection Circuitry Protected against false pulse on power-up and continuous short-circuit
Output Response Time 500 microseconds (normal mode) or 200 microseconds (high-speed mode)
Delay at Power-up 200 millisecond; outputs do not conduct during this time.
Repeatability 100 microseconds (normal mode) or 66 microseconds (high-speed mode)
Adjustments Two push buttons and remote wire Push buttons or remote wire:Expert TEACH programming (two-point static, dynamic and single-point static), light operate (LO)/dark operate (DO), OFF-delay and response speed
Push button only:Manually adjust (+/-) sensitivity
Remote wire only:Push-button lockout
Indicators 8-segment Red bargraph:Light-to-dark signal difference relative to taught condition (single-point TEACH )
Green status indicators:LO, DO, High Speed and OFF-delay
Green LED:Power ON
Yellow LED:Output conducting
Construction Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover.
Environmental Rating NEMA 1; IEC IP50
Connections PVC-jacketed 2 m or 9 m 6-wire attached cable or integral 6-pin Pico-style QD. QD cables are ordered separately.
Operating Conditions Temperature:-10° to +55° C
Storage Temperature:-20° to +85° C
Relative humidity:90% @ 50° C
Installation 35 mm DIN rail or included mounting bracket
Similar Products