Scroll Up


Detection (Sensors) > Fiber Optic Sensors >D10 Series D10 Expert - Small Object Counter
D10 Expert - Small Object Counter

Marka: Banner Engineering

Product Labels: fiberoptic Sensors, Banner engineering

D10 Expert - Small Object Counter

  • Product Specifications
  • Product Documents
  • Similar Products
Product Specifications

Overview

Fiber amplifier and fiber optic arrays specially designed for reliable detection of objects as small as 1.5 mm

  • Easy-to-set selectable threshold with automatic compensation algorithm which compensates for dust or contamination on the fiber optic array and for ambient temperature changes
  • Easy-to-read, user configurable 4-digit display for health Mode, Percentage Blocked, Signal Level, or Counter Mode readout, plus indicators for a continuous readout of operating status
  • New Dynamic Event Stretcher (DES) feature prevents double counting of liquid-filled gelatin tablets and objects with holes
  • Standard sized or customer specified fiber arrays available for reliable small object counting
  • 16-bit microcontroller and 12-bit Analog-to-Digital converter (ADC) for high-performance, low-contrast sensing
  • Single discrete output plus Health Mode output to indicate preventative maintenance is required
  • Sleek, ultra-slim 10 mm housing, mounts to a standard 35 mm DIN rail
Sensing Beam Visible red, 680 nm
Required Fiber Optics PFCVA models (Custom fiber arrays and mounting configurations are possible. Consult factory for assistance with your small object counting application.)
Supply Voltage and Current 12 to 24V dc (10% maximum ripple) at less than 65 mA, exclusive of load
Supply Protection Circuitry Protected against reverse polarity and transient voltage
Output Configuration 2 NPN or 2 PNP, depending on model
Output Rating 150 mA maximum load OFF-state leakage current:< 10 μA at 24V dc
ON-state saturation voltage:NPN < 1.5V at 150 mA load
ON-state saturation voltage:PNP < 2.5V at 150 mA load
Output Protection Circuitry Protected against false pulse on power-up and continuous short-circuit
Output Response Time Programmable, 150 μs, 225 μs, 300 μs NOTE:< 1 second delay on power-up; outputs do not conduct during this time.
Adjustments Push-button or remote programming of threshold offset percentage, light/dark operate, Dynamic Event Stretcher (DES), display, and power/speed
Indicators Four-digit digital display, 2 arrow icons, push-button lockout, Dynamic Event Stretcher, light/dark operate selection, and 2 amber output LEDs
Construction Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover
Environmental Rating NEMA 1, IEC IP50
Connections PVC-jacketed 2 m or 9 m (6.5' or 30') 6-wire integral cable or integral 6-pin Pico-style quick-disconnect
PVC-jacketed 2 m or 9 m (6.5' or 30') 6-wire integral cable or integral 6-pin Pico-style quick-disconnect Temperature:-20° to +55°C (-4° to +131°F)
Storage Temperature:-20° to +80°C (-4° to +175°F)
Max. Rel. Humidity:90% @ 50°C (non-condensing)
3 Devices, Stacked:Ambient Temperature Rating: 55°C; Load Specification: 150 mA
7 Devices, Stacked:Ambient Temperature Rating: 50°C; Load Specification: 50 mA
10 Devices, Stacked:Ambient Temperature Rating: 45°C; Load Specification: 50 mA
Installation 35 mm DIN rail or included mounting bracket
Certifications CE

 

Product Documents
D10 Expert - Small Object Counter22.12.2014 - 1 MbİngilizceCheck Out
Similar Products

WORLD-BEAM QS30 Standard

D10 Series

D10 Discrete Output