Scroll Up


Detection (Sensors) > Fiber Optic Sensors >D10 Series D10 Discrete Output
D10 Discrete Output

Marka: Banner Engineering

Product Labels: Fiberoptic Sensors, Banner engineering

D10 Discrete Output

  • Product Specifications
  • Product Documents
  • Similar Products
Product Specifications

Overview

High-performance, low-contrast plastic fiber optic sensor with gain adjustment knob.

  • 10 to 30V dc supply voltage with bipolar NPN or PNP outputs
  • 14-turn potentiometer for manual adjustment of sensitivity
  • LED pulse-rate indicator for signal strength
  • Response time as fast as 200 microseconds
  • Light- or dark-operate selectable
  • Selection switch for 0 to 40 millisecond OFF-delay
Supply Voltage and Current 10 to 30V dc (10% max. ripple) @ less than 25 mA (exclusive of load)
Range Varies by sensing mode and fiber optics used
Supply Protection Circuitry Protected against reverse polarity and transient voltage
Output Configuration Bipolar:One NPN (current sinking) and one PNP (current sourcing)
Output Rating 100 mA max. output with short-circuit protection OFF-state leakage current:less than 10 µA sourcing; 200 µA sinking
ON-state saturation voltage:

NPN:1.6V @ 100 mA

PNP:2.0V @ 100 mA
Output Protection Circuitry Protected against output short-circuit and false pulse on power up
Output Response Time Standard models:500 microseconds (with crosstalk avoidance circuitry)
High-speed models:200 microseconds
Delay at Power-up 100 millisecond; outputs do not conduct during this time.
Repeatability Standard models:95 microseconds
High-speed models:50 microseconds
Adjustments 12-turn Sensitivity potentiometer with relative position indicator; light operate (LO)/dark operate selection switch; 0 or 40 milliseconds OFF-delay switch

NOTE: Use proper ESD techniques while making adjustments under cover.
Indicators 2 LED Indicators:Green and Yellow

Green ON steady:power ON

Yellow ON steady:light sensed signal strength indicator (Banner's Aid Alignment Indicator Device—the faster the flash, the more light is received)
Construction Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover.
Environmental Rating NEMA 1; IEC IP50
Connections PVC-jacketed 2 m or 9 m attached cable or integral 4-pin Pico-style QD. QD cables are ordered separately.
Operating Conditions Temperature:-10° to +55° C
Storage Temperature:-20° to +85° C
Relative humidity:90% @ 50° C
Installation 35 mm DIN rail or included mounting bracket

 

Product Documents
D10 - Discrete Output22.12.2014 - 1 MbİngilizceCheck Out
Similar Products

WORLD-BEAM QS30 Standard

D10 Series

D10 Expert - Small Object Counter