Scroll Up



  • Product Specifications
  • Product Documents
  • Similar Products
Product Specifications

BAT867-R Industrial Wireless Access Points

The BAT867-R offers only the essential interfaces – one radio, one Ethernet port and one power supply – for industrial applications in need of a compactly designed, cost-effective wireless access point.

Product description

Description Rugged wireless LAN access point and/or client with IEEE 802.11ac for use in industrial environments.
Port type and quantity Interface1: - Ethernet port 1 : RJ 45 (10/100/1000BASE-TX data rates)
Radio protocol IEEE 802.11a/b/g/n/ac WLAN interface as per IEEE 802.11ac, up to 867 Mbit/s gross bandwidth.
Additional radio features 2x2 MIMO
Type BAT867-REUW99AU999AT199L9999H09.14.5500
Order No. 942 183-999

More Interfaces

Power supply/signaling contact 1 x plug-in terminal block, 2-pin

Radio technology

Antenna connector 2 × RSMA
Range Depending on antenna used, frequency range and data rate
Frequency band Supporting 2.4 GHz and 5 GHz: 2412 to 2472 MHz and 5180 to 5825 MHz
Modulation OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Encryption IEEE 802.11i / WPA2 with passphrase or 802.1x and hardware-accelerated AES, closed network, WEP64, WEP128, WEP152, user authentication, 802.1x /EAP, LEPS, WPA1/TKIP. Please refer to the HiLCOS data sheet for further information.

Power requirements

Operating voltage Voltage Range 1: 24 VDC (19.2-32 VDC)
Power consumption Maximum power consumption : 9 W

Ambient conditions

Operating temperature -10 ºC ... 60 ºC
Note Temperature of the surrounding air.
Storage/transport temperature -40 ºC ... 70 ºC
Relative humidity (non-condensing) 10 % ... 95 %
MTBF (Telcordia) 286.8 years; Telcordia SR-332; Gb 25ºC
Protective paint on PCB No

Software

Software features High performance operating system for the Hirschmann BAT products. Supports all WLAN functions, routing, firewall, VLAN, and redundancy. IPv6 in preparation. All BAT867-R devices operate as either standalone access points or as managed access points in combination with a BAT WLC Controller. Please refer to the HiLCOS data sheet for further information.

Mechanical construction

Dimensions (W x H x D) 50 mm x 147.5 mm x 122.5 mm
Mounting DIN Rail
Protection class IP40

Approvals

Basis Standard CE, EN 61131
Safety of information technology equipment EN 60950-1
Radio R & TTE - EN 300 328 (2.4 GHz) EN 301 893 (5 GHz) , EN 301 489-1, EN 301 489-17, EN 61000-6-2

Scope of delivery and accessories

Scope of delivery Device, Quick installation guide; 1 × premounted 2-pin terminal block for the supply voltage
Accessories to order separately External antennas; External surge protection; Cables 2m, 5m, 15m
Product Documents
datasheet BAT 867-R28.03.2017 - 1 MbİngilizceCheck Out
Similar Products