Scroll Up


Lighting Automation > KNX (EIB) Other Equipments RDG400KN Siemens KNX Room Thermostat
RDG400KN Siemens KNX Room Thermostat

Brand: SIEMENS

Product Tags: Siemens,SIEMENS,KNX,Lighting automation,GAMMA,Instabus,RDG400KN, Room thermostat with KNX cummunicat..

RDG400KN Siemens KNX Room Thermostat

Product Specifications

Type

RDG400KN (S55770-T165)

Description

Room thermostat with KNX communications‚ AC 24 V‚ VAV heating and cooling systems

Room thermostat with KNX communications‚ AC 24 V‚ VAV heating and cooling systems

  • KNX communications
  • Output DC 0…10 V for VAV actuator and auxiliary output ON/OFF‚ PWM or 3-position or 3-position for VAV actuator and auxiliary output DC 0...10 V
  • 2 multifunctional inputs for keycard contact‚ external room / return air temperature (1x‚ QAH11.1‚ QAA32)‚ heat / cool changeover‚ operation mode changeover‚ window contact on/off‚ dewpoint monitor‚ electrical heater enabled‚ fault contact
  • 1 input DC 0...10 V for damper position feedback
  • Operating modes: Comfort, Economy and Protection
  • Modulating PI control
  • Control depending on the room or the return air temperature
  • Automatic or manual heating / cooling changeover
  • Adjustable commissioning and control parameters
  • Minimum and maximum setpoint limitation
  • Minimum and maximum limitation of air flow signal
  • Output signal inversion (DC 0...10 V) as an option
  • Backlit display

 

Application selectable:

  • Single-duct system
  • Single-duct system with electrical heater
  • Single-duct system and radiator / floor heating
  • Single-duct system with heating / cooling coil

 

Operating voltage                           AC 24 V

Setpoint setting range                     5…40 °C

Analog inputs‚ number                    2

Analog inputs, signal                       NTC 3k

                                                        DC 0…10 V

Digital inputs, number                     1

Analog outputs‚ number                  1

Analog outputs                                VAV actuator, electric heater, valve

Analog output, signal                      DC 0…10 V

Analog output, current                     Max. ±1 mA

Triac outputs, number                     1

Triac outputs                                   VAV actuator, valve, el. heater

                                                        2-position, PWM, 3-position

Triac output‚ switching voltage        AC 24 V

Triac output‚ switching current        Max. 1 A

Type of fixing                                  Wall mounting with screws

Degree of protection                       IP30

Dimensions (W x H x D)                 93 x 128 x 30,8 mm

Product Documents
RDG400KN10.11.2015 - 1 MbİngilizceCheck Out
Similar Products

Siemens Cerberus PRO FC722 Fire Control Panel

Siemens Cerberus PRO FDA241 - FDA221 Active Air Pull Smoke Detector

Siemens Sinteso FDF221-9 - FDF241-9 Flame Detector

Siemens Cerberus PRO FDS229-R, FDS221-R, FDAI91 Sounder Base Alarm

Siemens Cerberus PRO FT724 Fire Terminal

Siemens Cerberus PRO OH720 - OP720 - HI720 - HI722 Fire Detectors

Siemens Cerberus PRO OOH740-OOHC740 ASA Detectors

Siemens Sinteso Cerberus PRO FDBZ292 Air Sampling Smoke Detector Kit

Siemens Sinteso FDCIO223 Transponder