Scroll Up

Lighting Automation > KNX (EIB) Lighting 5WG1525-2AB13 Siemens KNX
5WG1525-2AB13 Siemens KNX


Product Tags: Siemens,SIEMENS,KNX,Lighting automation,GAMMA,Instabus,5WG1525-2AB13, universal dimmer, 1 x 230 V AC..

5WG1525-2AB13 Siemens KNX

Product Specifications


5WG1525-2AB13(N 525/13)


Universal Dimmer, 1 x 230 V AC, 10...250 VA, without mounting frame

Universal Dimmer‚ (R‚L‚C load)

  • One output for switching and dimming resistive‚ inductive or capacitive loads
  • Automatic adjustment to leading edge or trailing edge control‚ depending on the type of load
  • Rated operational voltage 230 V AC
  • Rated frequency 50...60 Hz
  • Rated power at +35°C ambient temperature: 10…250 VA
  • Electronic protection of the output against overload‚ short circuit and temperature rise
  • Reporting of overload‚ short circuit and temperature rise via the bus
  • Screwless terminals for connection and through-wiring of untreated single-core‚ stranded or multicore conductors‚ 0.5...2.5mm²
  • Selectable mode for each output (normal mode‚ one- or two-level timer mode‚ blinking)
  • Adjustable on- and off-delay
  • Separately adjustable dimming time from 0% to 100% for switching on / off and dimming brighter / darker
  • Two dimming value objects‚ each with individually adjustable dimming time from 0...100%
  • The ability to switch an output on or off by dimming brighter / darker
  • Adjustable dimming value when switching on
  • Immediate activation (jumping) or dimming to a new dimming value
  • Selectable additional status object switching and / or status object dimming value for each output
  • Additional object for each output for blocking / releasing the output
  • Sending of status objects on request and / or automatically after a change
  • Adjustable blocking time for sending status objects after restart and bus voltage recovery
  • Adjustable dimming value for each output in the event of bus voltage failure and recovery‚ as well as for mains voltage recovery
  • Additional night mode object for time-limited switching on the output (and hence illumination) at night
  • Adjustable on period at night or with timer mode
  • Selectable warning of imminent switching off the illumination by dimming to 50% of the previous dimming value during night mode or timer mode
  • Integrated 8-bit scene control and integration of each output in up to 8 scenes
  • Separately adjustable dimming time for scene control
  • Selectable counting of operating hours and with threshold monitoring of the operating hours
  • Selectable counting of load cycles and with threshold monitoring of the load cycles
  • Bus-powered electronics
  • Integrated bus coupling units‚ Bus connection via bus terminal
Product Documents
5WG1525-2AB1321.10.2015 - 1 MbİngilizceCheck Out
Similar Products

Siemens Cerberus PRO FC722 Fire Control Panel

Siemens Cerberus PRO FDA241 - FDA221 Active Air Pull Smoke Detector

Siemens Sinteso FDF221-9 - FDF241-9 Flame Detector

Siemens Cerberus PRO FDS229-R, FDS221-R, FDAI91 Sounder Base Alarm

Siemens Cerberus PRO FT724 Fire Terminal

Siemens Cerberus PRO OH720 - OP720 - HI720 - HI722 Fire Detectors

Siemens Cerberus PRO OOH740-OOHC740 ASA Detectors

Siemens Sinteso Cerberus PRO FDBZ292 Air Sampling Smoke Detector Kit

Siemens Sinteso FDCIO223 Transponder