IR Receiver decoder

• For receiving IR signals transmitted from IR wall-mounted transmitters or IR hand-held transmitters
• Conversion of IR signals received from up to 32 IR channels into bus telegrams
• Configurable evaluation of the IR signals per IR channel as single button or as button pair
• Per IR button selectable functions

- Switching on/off/over
- Switching on or off at neither rising or falling edge
- Single button dimming
- Single button sun protection control
- 1-/8-bit scene control
- 8-/16-bit value
- Percentage value
- Temperature value
- Brightness value
- Positively driven operation

• Depending on the selected main function

- Per IR button selectable additional function executed either after a time delay (time delay configurable
from 100 ms to 6550 s) or alternatively on a long button press

• Per IR button pair selectable functions

- 2-button dimming with stop telegram
- 2-button sun protection control
- Transmission variable percentage value
- Transmission variable 8-bit value
- 1-/8-bit scene control
- Positively driven operation

• Depending on the selected main function: per IR button selectable additional functions

- Switching on/off
- 8-16-bit value
- Percentage value
- Temperature value
- Brightness value
- Recall/save 1-bit scene 1
- Recall/save 1-bit scene 2
- Recall 8-bit scene
- Positively driven on/off/deactivate

• Blocking can selected for each IR button and configured individually
• Integrated bus coupling units‚ Bus connection via bus terminal
• Bus-powered electronics
• Including clamping spring and rosette for installation in ceilings‚ walls or lights
• For commissioning when mounted‚ a magnet is required‚ such as a 5WG1 590-8AH01 programming magnet

       Dimensions (W x H x D)                            25 x 26 x 75 mm