Lighting Automation > KNX (EIB) Gateways 5WG1450-7AB03 Siemens KNX IR Receiver Decoder S 450-03


Product Tags:

Product Specifications


5WG1450-7AB03(S 540/03)



IR Receiver decoder

  • For receiving IR signals transmitted from IR wall-mounted transmitters or IR hand-held transmitters
  • Conversion of IR signals received from up to 32 IR channels into bus telegrams
  • Configurable evaluation of the IR signals per IR channel as single button or as button pair
  • Per IR button selectable functions

            - Switching on/off/over

            - Switching on or off at neither rising or falling edge

            - Single button dimming

            - Single button sun protection control

            - 1-/8-bit scene control

            - 8-/16-bit value

            - Percentage value

            - Temperature value

            - Brightness value

            - Positively driven operation

  • Depending on the selected main function

             - Per IR button selectable additional function executed either after a time delay (time delay configurable

               from 100 ms to 6550 s) or alternatively on a long button press

  • Per IR button pair selectable functions

             - 2-button dimming with stop telegram

             - 2-button sun protection control

             - Transmission variable percentage value

             - Transmission variable 8-bit value

             - 1-/8-bit scene control

             - Positively driven operation

  • Depending on the selected main function: per IR button selectable additional functions

             - Switching on/off

             - 8-16-bit value

             - Percentage value

             - Temperature value

             - Brightness value

             - Recall/save 1-bit scene 1

             - Recall/save 1-bit scene 2

             - Recall 8-bit scene

             - Positively driven on/off/deactivate

  • Blocking can selected for each IR button and configured individually
  • Integrated bus coupling units‚ Bus connection via bus terminal
  • Bus-powered electronics
  • Including clamping spring and rosette for installation in ceilings‚ walls or lights
  • For commissioning when mounted‚ a magnet is required‚ such as a 5WG1 590-8AH01 programming
  • magnet

       Dimensions (W x H x D)                            25 x 26 x 75 mm

Product Documents
5WG1450-7AB03 IR Alıcı Dekoder S 450-0303.11.2015 - 1 MbİngilizceDownload
Similar Products

Siemens Cerberus PRO FC722 Fire Control Panel

Siemens Cerberus PRO FDA241 - FDA221 Active Air Pull Smoke Detector

Siemens Sinteso FDF221-9 - FDF241-9 Flame Detector

Siemens Cerberus PRO FDS229-R, FDS221-R, FDAI91 Sounder Base Alarm

Siemens Cerberus PRO FT724 Fire Terminal

Siemens Cerberus PRO OH720 - OP720 - HI720 - HI722 Fire Detectors

Siemens Cerberus PRO OOH740-OOHC740 ASA Detectors

Siemens Sinteso Cerberus PRO FDBZ292 Air Sampling Smoke Detector Kit

Siemens Sinteso FDCIO223 Transponder