Brightness controller

• For measuring the brightness on an illuminated work area through measurement of the reflected light
• Measuring range 0...2000 lux (with a reflectance of the illuminated area of approx. 30%)
• Including two rigid optical fiber rods:

• Parallel light-sensitive surface for mounting surface
• Inclined (30°) light-sensitive surface for mounting surface

• Integrated infrared receiver for calibration of the brightness measurement via the S 255 infrared remote calibration tool
• Transmission of the brightness measured value‚ either in the event of change and/or cyclically
• Discretionary set-point as a parameter or a communication object
• Optional two-step dimmer control for lights that can only be switched or constant light level control for lights that can be switched and dimmed
• Selectable starting value of the lighting at the start of constant light level control
• Optionally with dimming of up to 4 further lighting groups to the dimming value of the constant light level control or a dimming value that differs from the dimming value of the constant light level controller by an offset value‚ which can be set per group
• The constant light level control is automatically deactivated by manually dimming‚ or by dimming to a preset value
• Configurable behavior in the event of a bus voltage recovery

                Dimension (Ø x H)                           75 x 27 mm