Voice Alarm and Sound > System Center Equipments
Siemens Novigo Address and Voice Alarm System
Earth Fault Monitoring

Brand: SIEMENS

Product Tags: Earth, Fault Monitoring, Novigo, Earth Fault Monitoring


Product Specifications

ITEC Earth Fault Monitoring is a module for the monitoring of 24 volts power supply cables for remote system components (eg callstations). IT measures the resistance of both lines compared with the protective conductor (PE).

In accordance with the relevant standards a ground fault error is detected when a resistance of <50 kOhm against protective conductor is measured. A fault message is performed by relay contact and is indicated on the board by a LED.

 

  • Open Frame module for the installation in a system cabinet.
  • Easy installation, prepared for DIN-rail 35 mm.
  • All connections on plug terminal blocks.
  • Collective fault at relay changeover contact (Fault / OK).
  • Switch to lower sensitivity (10k) by jumper setting.
Product Documents
Earth Fault Monitoring datasheet26.02.2016 - 2 MbEnglishDownload
Similar Products

Siemens Novigo Address and Voice Alarm System

Novigo AC-Net Matrix PC2002 Spider04

Novigo AC-Net Matrix PC2002 Spider44

Novigo AC-Net Matrix PC2003 Spiderline16

Earth Fault Monitoring SMD

Industrial Micro SD Card

Novigo Power Amplifier (1x250W) PA2007

Novigo Power Amplifier (2x250W) PA2001

Novigo Power Amplifier (4x150W) PA2003

AC-Net Call Station Desk PT2001 SpiderMike 2

Call station 1/3 Extension

SPM-DM Gooseneck Microphone

Siemens Novigo Address and Voice Alarm System Components

AVC-MIC SMD Automatic Volume Control-Microphone

AVC-Monitoring SMD

CAT5 Repeater

EOL 2

EOL3

Indication Board

Industrial Switch PL-ISW 1022MT

I/O Expander

Level 2 Control Panel

Line Detection Module

Relais Extension 8

SWITCH 4/1

System Cable Speaker Line 16

UP Remote Control Panel

Firefighters Call Station