Binary Output‚ 2 x 230V AC‚ 10A

• with one potential-free relay contact per output
• rated voltage 230 V AC
• rated current 10 A at p.f. = 1
• with selectable programs for the independent switching on/off of electrical loads‚ either with direct operation or with forced control‚ with status objects
• with operation as time switch or with on/off delay
• with logic operation (AND/OR) of two communication objects for channel A
• with selectable relay operating mode (NC contact / NO contact)
• with control of an electro thermal valve actuator or electrical heating
• with monitoring of the room temperature controller
• with adjustable characteristics of thermal drive (valve opened or closed for isolated drive)
• with communication object for reception of up to three window contact data per channel and closing of the valve if the window is open
• with communication objects for the reception of a frost alarm signal per channel
• with activation of the heating to 50 % of the On period (corresponds to a half-opened valve) if a frost alarm is received and on failure of communication with the room temperature controller
• with configurable output state in case of bus voltage failure and bus voltage recovery
• with bus-powered electronics
• with integrated bus coupling unit‚ bus connection via contact system to data rail
• for mounting on DIN rail EN 60715-TH35-7,5.

     Dimension width (1 MW - 18 mm)         2 MW