Universal dimmer UP 525/31‚ 210 VA‚ AC 230 V‚ 50 Hz (R‚L‚C load)

• One output for switching and dimming resistive‚ inductive or capacitive loads
• With semiconductor output for switching and dimming of lamps
• Rated operational voltage AC 230 V‚ 50/60 Hz
• Connected load 50...210 VA
• Settable switching and dimming behaviour
• Selectable mode of operation (normal mode‚ timer mode)
• Soft on‚ Soft off
• Dimming or jumping to a new dimming value
• Time-delayed switch-off when dimming below a settable dimming value
• Status objects for switching and dimming value
• Short-circuit message
• Message of a load failure
• Integrated 8-bit scene control
• Object for blocking the output
• Configurable brightness value at start and end of a blocking phase
• Adjustable behaviour of the output after bus voltage recovery
• 2 binary inputs for potential-free contacts
• Selectable function of the binary inputs: acting as secondary inputs directly on the switching outputs or acting as independant binary inputs with bus communication
• Free allocation of the functions switching‚ dimming‚ solar protection control‚ send value and scene control to the inputs
• Two independent switching objects per input
• Blocking object for each input
• Separately selectable behaviour per input at bus voltage recovery
• Telegram rate limitation for both inputs
• About 20 cm long wires for connecting phase conductor‚ output‚ inputs and bus
• Bus-powered electronics
• Integrated bus coupling unit
• Enclosed bus terminal for bus connection
• For installation in a flush-mounting wall or ceiling box with 60 mm diameter

     Dimension (Ø x H)                      53 x 28 mm