Yukarı kaydır



  • Ürün Spesifikasyonları
  • Ürün Dökümanları
Ürün Spesifikasyonları

Genel Bakış

  • Easy-to-use diffuse-mode sensor 
  • Provides high-performance sensing in low-contrast applications
  • Visible red beam provides easy sensor alignment
  • Offers multiple configuration options, in addition to manual fine adjustment, remote programming, and security lockout options.
  • Features bipolar outputs, one each NPN and PNP
  • Compact housing has a large, easy-to-see bargraph display plus bright LEDs for easy configuration and status monitoring during operation
  • Can be side-mounted, using its integral mounting holes, or front-mounted, via its 30 mm threaded barrel.
Sensing Beam 660 nm visible red
Supply Voltage 10 to 30V dc (10% max. ripple) @ 25 mA max current, exclusive of load
Supply Protection Circuitry Protected against reverse polarity, over voltage, and transient voltages
Delay at Power-Up 250 ms; outputs do not conduct during this time
Output Configuration Bipolar: 1 current sourcing (PNP) and 1 current sinking (NPN)
Output Ratings 150 mA maximum load (derate ~ 1 mA/°C above 25°C)

OFF-state leakage current: < 50 μA at 30V dc

ON-state saturation voltage:

NPN: < 200 mV @ 10 mA; < 1V @ 150 mA

PNP: < 1.25V @ 10 mA; < 2V @ 150 mA
Output Protection Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up
Output Response Time High-Speed Mode: 300 microseconds

Normal Mode: 1.8 ms
Repeatability High-Speed Mode: 100 microseconds

Normal Mode: 150 microseconds
Adjustments 2 push buttons and remote wire

• Easy push-button configuration

• Manually adjust (+/–) cutoff (push buttons only)

• Light Operate/Dark Operate and OFF-delay configuration options (push buttons only)

• Push-button lockout (from remote wire only)
Indicators 8-segment red bargraph: Distance relative to cutoff point

Green LED: Power ON

Yellow LED: Output conducting
Construction ABS plastic housing; acrylic lens cover
Environmental Rating IP67, NEMA 6
Connections 5-conductor 2 m (6.5') PVC cable, 9 m (30') PVC cable, or 5-pin integral Euro-style quick-disconnect fitting
Operating Conditions Temperature: -10° to +55°C (+14° to 122°F),

Max. relative humidity: 90% @ 55°C (non-condensing)
Vibration and Mechanical Shock All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60 Hz max. double amplitude 0.06
Certifications C E

 

Ürün Dökümanları
WORLD BEAM QS30 Expert Diffuse-Mode Sensor22.12.2014 - 1 MbİngilizceGörüntüle
Benzer Ürünler