Sensing Beam | 660 nm visible red |
---|---|
Supply Voltage | 10 to 30V dc (10% max. ripple) @ 25 mA max current, exclusive of load |
Supply Protection Circuitry | Protected against reverse polarity, over voltage, and transient voltages |
Delay at Power-Up | 250 ms; outputs do not conduct during this time |
Output Configuration | Bipolar: 1 current sourcing (PNP) and 1 current sinking (NPN) |
Output Ratings | 150 mA maximum load (derate ~ 1 mA/°C above 25°C) OFF-state leakage current: < 50 μA at 30V dc ON-state saturation voltage: NPN: < 200 mV @ 10 mA; < 1V @ 150 mA PNP: < 1.25V @ 10 mA; < 2V @ 150 mA |
Output Protection | Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up |
Output Response Time | High-Speed Mode: 300 microseconds Normal Mode: 1.8 ms |
Repeatability | High-Speed Mode: 100 microseconds Normal Mode: 150 microseconds |
Adjustments | 2 push buttons and remote wire • Easy push-button configuration • Manually adjust (+/–) cutoff (push buttons only) • Light Operate/Dark Operate and OFF-delay configuration options (push buttons only) • Push-button lockout (from remote wire only) |
Indicators | 8-segment red bargraph: Distance relative to cutoff point Green LED: Power ON Yellow LED: Output conducting |
Construction | ABS plastic housing; acrylic lens cover |
Environmental Rating | IP67, NEMA 6 |
Connections | 5-conductor 2 m (6.5') PVC cable, 9 m (30') PVC cable, or 5-pin integral Euro-style quick-disconnect fitting |
Operating Conditions | Temperature: -10° to +55°C (+14° to 122°F), Max. relative humidity: 90% @ 55°C (non-condensing) |
Vibration and Mechanical Shock | All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60 Hz max. double amplitude 0.06 |
Certifications | C E |